Hello everyone.Today we bring you a full comparison of the GEN Blue datejust 126334 with several major manufacturers! Let's get right to it! 

Front view

1cdaf92b.jpg

e8137cbc.jpg

 973c13ca.jpg

bd01c695.jpg

There is unavoidable about the color difference in the blue dial, the GEN is a dark blue, the AR factory deviates the most and looks similar to a faded color!

AR sunburst on the dial is too strong, VS is the closest to GEN, followed by CLEAN, GM is too indistinct!

Bezel view
bf28ac3d.jpg

b7fba5f8.jpg

95f72c11.jpg


VS, CLEAN and AR are all very good in the teeth shape, GM is on the long side and the angle of the triangle on the inner edge is obviously too small! Also the triangle of the AR is too smooth.

Stick Marer view
c643ecd2.jpg

c0b2d6f1.jpg

The overall shape of the VS is closer to the GEN, VS is better filled, the downside is the lack of rounding of the sharp edges,the other three are still mainly due to the lack of filling of the inner edges, resulting in significant gaps. Clean's chamfering of the scales is still excellent.

Crown side view

d5798785.jpg

It’s not very good to compare because the angle of the picture will deviate. But after I repeatedly observed the physical comparison, the four factories are actually similar, all still good, or maybe my eyes are not very good! I'll have to see what you guys have to say!

Lume filling view

2b8dd0a7.jpg

b64057c2.jpg

All three are very good, except for the GM, which is too smooth, and the AR is the grainiest, for the C, which is the closest in color and texture to the GEN!

Engraving font view
040e8c2f.jpg

5ab9e0ec.jpg

1ed0dbd4.jpg

576c6126.jpg

2f9faf2e.jpg

8c008182.jpg

a8b5c73b.jpg

The VS and Clean are very flat, the GM and AR font have uneven edges, especially the AR!

As we can see, GEN's type is very glossy, something that all the factories lack! We noticed through the macro lens that GEN's ink printing is much fuller,

but if you look at it from the naked eye, other factories do a good job, except AR, which can be noticeably different

Hand view
febb83c0.jpg

a48f9c9e.jpg

68ff34d5.jpg

The shape of the central axis of the hands, VS factory and C factory have done skeletonized solid structure,

but C factory's central sleeve position, flatness is very poor, GM and AR's sleeve position is completely closed, and is very different from GEN.

From the side view, the whole arrangement of VS and GM is very close to GEN, AR appears too dense.

Crystal Giant Side View
208c94f4.jpg

The overall translucency of all the factories is fine, and the cross-sectional chamfers of the windows are best polished by the AR factory!

1-31 calendar display view
01c62191.jpg

8339833b.jpg

c7cc6341.jpg

269977ad.jpg

1fad8ad6.jpg

41bc2fb0.jpg

457e41fd.jpg

There's nothing much to say about this! You can compare for yourself if you want to.

Rehaut view
0c9aafaf.jpg

89693b2e.jpg

The GM factory engraving has some darkening and looks a bit like rust; for the AR factory, the engraving looks a bit too light in person, both VS and Clean are still quite good

Case side view

141cd560.jpg

8ef09a21.jpg

 All the factories are fine in terms of case type, and there are no significant differences!

Sel view

2d684de0.jpg

aca30749.jpg

First, we can check the location of arrow pointed, the layered VS on the side of the bezel is the closest to the GEN, which is commendable, followed by the AR, which is less pronounced in the C factory, and the GM, which is almost flat.

Then where the lugs meet the headstock, VS and GEN are the same, GM is not too bad, VS and AR are almost flat.


Strap view
275882d9.jpg

7ca60f93.jpg

25b16ce4.jpg

cb6ba7f5.jpg

e17fe589.jpg

2d6b4ba4.jpg

The VS and CLEAN both use AR steel straps, but the GM steel strap does feel a little different than the AR!

The engraving is still a far cry from the GEN.

Case back view
c8ae1731.jpg

455d3900.jpg

 The same old problem as in the C factory, a ring around the bottom of the teeth, spillover from the brushed lines, unevenness!

Lume view

d7453dcd.jpg

 The stripes on the bezel are very strong for VS, weaker for C, and almost non-existent for GM and AR.

Laser view

98f1eb88.jpg

 GEN's irregularly arranged crown pattern is always a problem for factories! And we don’t need to be too concerned!

Comparative chart of various data
0bfb951f.png

73d9f740.png

09d73e92.png

e4532e89.png

164dd962.png

Note: All measurements are taken in a calibrated state and may be inaccurate due to slight deviations in caliper position
All the replicas haven't take off the plastic protector. the VS and GM have removed the steel strap protector as you can see, the GM is closest in weight to the GEN !

Well, that's it for today's post, thanks for watching, if there are any mistakes, please correct me, welcome to comment and exchange!



We will bring you more detailed comparisons between the replicas and GEN later, also to let you better choose your favorite style replicas, you can leave a comment on what style you are more interested in!
Description: (Some of the photos have deviated from the real thing because of the light source, the details are still based on the text, the size of the comparison pictures are relatively large, you can download them and enlarge them for comparison.)


Plese contact me by the following contact info if you want to purchase anything. 
https://www.theonewatches.io/ 
email:theonewatches.ru@gmail.com
whatsapp:+ 86 17081934955